spacer

Hygienic

Litre Meter specialise in the design, manufacture and supply of flowmeters. Sierra manufacture a range of high purity and ultra high purity flowmeters for gas applications. Hoffer have a certified turbine meter to 3A standard. Euromag manufacture electromagnetic meter with hygienic end fittings. Listed below are all the flow meters within our range that are suitable for hygienic duty:


Ultrasonic Ultrasonic flowmeters measure the travelling times (transit time models) or the frequency shifts (Doppler models) of ultrasonic waves in a pre-configured acoustic field that the flow is passing through to determine the flow velocity. The Sierra range of ultrasonic (transit time) Innovasonic devices are available, click for details. Litre Meter has access to other ranges but the Innovasonic is relatively unique as not only are fixed and portable ultrasonics available but also insertion devices for tougher applications. Ultrasonic flow meters can measure water and other liquids over a range of velocities and with a certain amount of solid content. 25mm to 10000mm;±1.0% of reading (also 0.5%); 0 to ±40 ft/s (0 to ±12 m/s).
Turbine Inline ‘axial’ turbine flowmeters are velocity measuring devices - they measure the average velocity of a fluid flowing through the body of the meter. Mounted within the body of a gas turbine flowmeter is a vaned rotor. The rotor is centred on a shaft and allowed to rotate on bearings. The shaft is supported in the housing by tube bundles that also provide a measure of flow conditioning for the fluid stream. Good for hygienic flow metering. Wide size range and excellent accuracy. 0.24-17 up to 3028-56775 litres/min. Overrange 150% intermittent. ±0.25% reading - typical. ±0.1% repeatability.
Electromagnetic Magnetic flowmeters, also known as electromagnetic flowmeters or induction flowmeters, obtain the flow velocity by measuring the changes of induced voltage of the conductive fluid passing across a controlled magnetic field. The fluid has to be conductive so tap water and waste water are OK. Care has to be taken in measuring solvents, hydrocarbons, de-ionised and demineralised water where electromagnetic flow meters are not normally used due to low conductivity. Contact Litre Meter for full details. 3mm to 2000mm although insertion units can be used up to 3000mm. ±0.2% over flow range 0.5 to 5 m/s; turndown 1000:1; maximum velocity 10 m/s.