Digmesa

Very low cost, precise flowmeter in Arnite, specially designed for coffee machines that use vibratory pumps. With push-on connections. PVDF option.

0.03 to 2.00 l/min depending on nozzle diameter 1.00 to 2.00 mm

Any non abrasive, chemical compatible low viscosity liquid.

• ±2% reading - linearity.
• ±0.25% repeatability.

Pressures up to 0.3 bar at 20°C. Temperature range -10°C to +65°C.

Thanks to its closure system, the water outlet side can be assembled in four different positions. Central sprayed fastening pin Ø 2.8mm x 7.5mm. Recommended washer disk: Quicklock® Benzing Ø 3mm or Starlock P-6490 Ø 3mm. Designed to be installed before the pump.

Low cost, precise flowmeter in brass. With 1/4" BSP connections.

0.04 to 7.84 l/min depending on nozzle diameter 1.00 to 6.00 mm

Any non abrasive, chemical compatible low viscosity liquid.

• ±2% reading - linearity.
• ±0.25% repeatability.

Pressures up to 20 bar at 20°C. Temperature range -10°C to +100°C.

Inlet and outlet on the same side, compact design, great working range, depending on the nozzle diameter. Widely fitted to commercial coffee machines.

Low cost, precise flowmeter used in coffee machines and postmix systems.

0.027 to 8.3 l/min depending on nozzle diameter 1.00 to 5.60 mm

Any non abrasive, chemical compatible low viscosity liquid.

• ±2% reading - linearity.
• ±0.25% repeatability.

Pressures up to 20 bar at 20°C. Temperature range -10°C to +65°C.

Arnite, Ryton or PVDF meter ideal for general applications with low pressure and temperatures. Inlet and outlet on the same side, compact design, great working range, depending on the nozzle diameter.

Low cost, precise flowmeter developed for higher flows. With 1/4", 1/2" or John Guest connections. Optional LCD. Arnite or PVDF

0.04 to 30 l/min depending on nozzle diameter 1.00 to 10.00 mm

Any non abrasive, chemical compatible low viscosity liquid.

• ±2% reading - linearity.
• ±0.25% repeatability.

Pressures up to 10 bar at 20°C. Temperature range 0°C to +60°C.

Linear inlet and outlet. Time and date administration, upward or backwards counters, history with date, instantaneous value announcement, automatic impulse calibration, litres and /or alarm-date, security code prevents tampering by unauthorised persons. Current supply over lithium battery. With a battery change all attitudes and values are stored.

Low cost, precise flowmeter in Arnite or PVDF. With 1/2" or 5/8" BSP or John Guest connections. This flowmeter is employed with great success in beer and premix dispensing systems.

0.22 to 15.75 l/min depending on nozzle diameter 4.00 to 6.00 mm

Any non abrasive, chemical compatible low viscosity liquid.

• ±2% reading - linearity.
• ±0.25% repeatability.

Pressures up to 5.5 bar at 20°C. Temperature range -10°C to +65°C. (PVDF 100°C)

By means of its special jewelled bearing, its fitting position can be freely selected. Inlet and outlet are freely selectable.

Low cost, highly precise flowmeter in Arnite or PEEK with 1/4"BSP or John Guest fittings. Epicycloid gears. Syrup, oils and concentrates.

0.06 to 16 l/min depending on viscosity.

Any non abrasive, chemical compatible higher viscosity liquid.

• ±1% reading - linearity.
• ±0.25% repeatability.

Pressures up to 10 bar at 20°C. Temperature range -10°C to +65°C. (PVDF 100°C)

Highly viscous media, high temperatures, high flow rates with low pressure loss and good chemical resistance.