Low flow electromagnetic flowmeter with PTFE liner. BSP connections. 3, 6, 10, 15 & 20mm diameter. 15mm & 20mm are standard sizes.

At 2 m/s 0.85 to 30.5 litres/minute

Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.

• PTFE Lining with three 316L stainless steel electrodes as standard;
• IP68 to 1.5m metres
• 501 series has PP liner, 10 bar & IP67

Low flow electromagnetic flowmeter - the right choice for the automotive market. DN15 to DN50, hose connections, PN10, PBT & fibreglass lining

±0.5% over flow range 0.5 to 5 m/s; maximum velocity 10 m/s. Converter normally separate.

At 2 m/s 21.2 to 236 litres/minute depending on connection size.

Any conductive liquid, must be greater than 10 microSiemens/centimetre. Accuracy not dependent on solids content.

• 10 bar
• -25°C to +80°C
• -25°C to +120°C with separate converter (6.1m cable standard)

• PBT & Fibreglass lining with three 316L stainless steel electrodes as standard;
• IP67 NEMA 6
• Also available: 500 series has PTFE liner, 16 bar & IP68

Extended linearity electromagnetic flowmeter with PTFE liner designed for wafer fitting between flanges. 25mm to 300mm

±0.2% over flow range 0.5 to 5 m/s; turndown 1000:1; maximum velocity 10 m/s

At 2 m/s between 59 and 8480 l/min depending on meter size

Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.

• 40 bar (16bar over 200mm)
• -40°C to +180°C (for separate version); 80°C for the compact version

• PTFE Lining with three Hastelloy electrodes as standard;
• IP68 to 1.5 metres
• 1100J series has PBT liner, IP67, low cost

Lightweight, compact electromagnetic flowmeter with PBT liner designed for wafer fitting between flanges. 25mm - 150mm

±0.2% over 0.5 to 5 m/s; maximum velocity 10 m/s

At 2 m/s between 59 and 2121 l/min depending on meter size

Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.

• 20 bar
• 0°C to +110°C (for separate version); 80°C for the compact version

• PBT Lining with three 316L stainless steel electrodes as standard;
• IP67
• 1000 series has PTFE liner and larger sizes

Extended linearity electromagnetic flowmeter with PTFE liner designed for flange fitting

±0.2% over 0.5 to 5 m/s; Turndown 1000:1; maximum velocity 10 m/s

At 2 m/s between 59 and 15080 l/min depending on meter size

Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.

• 6 to 64bar
• -20°C to +180°C (for separate version); 80°C for the compact version

• PTFE Lining with three Hastelloy electrodes as standard;
• Hard rubber Lining above 150mm
• IP68 to 1.5 meters

Extended linearity electromagnetic flowmeter with PTFE or Ebonite liner designed for flange fitting. 450 to 2000mm

±0.2% over 0.5 to 5 m/s; Turndown 1000:1; maximum velocity 10 m/s

At 2 m/s between 1145 and 22619 m3/hr depending on meter size

Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.

• 10 bar (mostly)
• -20°C to +80°C (for ebonite version); 180°C for the PTFE version

• Ebonite lining with three SS electrodes as standard;
• PTFE version
• IP68 to 1.5 meters

Hygienic electromagnetic flowmeter with PTFE liner

±0.2% over flow range 0.5 to 5 m/s; maximum velocity 10 m/s

At 2 m/s between 59 and 942 l/min depending on meter size

Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.

• 16 bar
• -40°C to +140°C (for separate version); 60°C for the compact version

• PTFE Lining with two 316L electrodes as standard;
• IP68 to 1.5 meters
• 304SS externals

Insertion electromagnetic flowmeters with PTFE. Pipe size 80 to 3000mm

3% of measured value with a flow velocity higher than 0.3m/s; maximum velocity 10 m/s

Velocity range: 0 to 10m/s

Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.

• 10/16 bar
• -40°C to +180°C (for separate version); 60°C for the compact version

• PTFE with 316L SS electrode as standard; pipe end 304SS
• IP68 to 1.5 meters
• 2660, low cost
• 2770, 16bar
• 2700, hot tap