KEM

Advanced technical know-how based on many years of practical experience have made the name KEM-Kueppers synonymous as a foremost international supplier of flowmeters, flow instrumentation and expert solutions to any flow measurement application.

Specializing in the field of flow metering technology and calibration KEM supply high quality flowmeters and solutions to your flow measurement tasks to all branches of international industry.

Along with our comprehensive range of Flow Monitors and our DKD Calibration Service KEM-Kueppers also endeavour to support our customers and business partners with technical back up and individual service.

  • KEM SRZ Helical
  • KEM HM Turbine
  • KEM ZH Gear
  • KEM LF
  • KEM Instrumentation
  • KEM KPS
 

KEM Gear Flowmeters
Click Photo for Spec Sheet Description Accuracy Flow Range Max. Pressures/ Temperatures Liquid Features
KEM ZHM-ST Gear Meter
KEM Gear

Gear flow meters are positive displacement meters which are used in various applications. KEM offers a great variety of models e.g. for paints, underbody seal, sealants.

Measuring ranges: 0.005 up to 1,000 litres/min

Any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

The cartridge design reduces the weight by another 50% compared with its predecessor. Therefore, the Cartridge-ZHM may be installed right behind the spray gun without adverse effects on the dynamic properties of the spray robot. The newly designed measuring kit provides a high resolution and allows for a precise measurement over a measuring range which would usually require two flow meters. The new flow meters can be completely purged within a few seconds and rapid colour changes are possible with no adverse effects on paints by residual sediments. The integral carrier-frequency pulse amplifier type VTE.CT or fibre-optic amplifier type FOP 60 allow for space-saving installation.

KEM ZHM-CT Gear Meter
KEM Gear

The gear flow meters in cartridge design were mainly developed for the automotive industry. Construction characteristics such as flat seals and single-ended shafts guarantee ideal purging qualities.

Measuring ranges: 0.005 up to 3 litres/min

Any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 1,000,000 cSt.

The cartridge design reduces the weight by another 50% compared with its predecessor. Therefore, the Cartridge-ZHM may be installed right behind the spray gun without adverse effects on the dynamic properties of the spray robot. The newly designed measuring kit provides a high resolution and allows for a precise measurement over a measuring range which would usually require two flow meters. The new flow meters can be completely purged within a few seconds and rapid colour changes are possible with no adverse effects on paints by residual sediments. The integral carrier-frequency pulse amplifier type VTE.CT or fibre-optic amplifier type FOP 60 allow for space-saving installation.

KEM ZHM-KL Gear Meter
KEM Gear

Gear flow meters, positive displacement meters with ball bearings.

Gear flow meters, positive displacement meters with ball bearings.

Measuring ranges: 0.005 up to 1,000 litres/min

Any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 25,000 cSt.

Very high output frequency Short response time High pressure up to 690 bar Reverse flow detection and pulse multiplication Ex-protected EExiaIICT4 or T6 for zone 1 Applicable in electrostatic spraying systems

KEM ZHA Gear Meter
KEM Gear

Aluminium Gear Flow Meters with ball bearings.

Measuring ranges: 0.02 up to 500 litres/min

Any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 25,000 cSt.

?High resolution ?Low pressure drop ?Dynamic response ?High accuracy ?Low weight

KEM ZHM-HP Gear Meter
KEM Gear

Gear Flow Meters for High Pressure Applications with Autoclave Connections up to 1,000 bar.

Any non-abrasive chemically compatible slightly lubricating liquid with viscosities up to 25,000 cSt.

Connections: Autoclave 3/8??_8F-375-CX Pressures up to 1000 bar short response time large range of viscosity Xylan coated screws frequency amplifiers with EExiall C T4 or T6 for zone 1