Datasheet Downloads from Litre Meter Ltd

 

Hoffer Turbine Meters
HO Liquid Turbine Flowmeters for Liquid service. From 1/4" to 12". From 0.24 to 56775 litres/minute Icon
rule
HO Gas Turbine Flowmeters for Gas service. From 1/4" to 12". From 0.15 to 12000 actual CFM. Icon
rule
HO Liquid - API Series for Custody Transfer Turbine Flowmeters for Liquid service ±0.15% or ±0.25% reading. From 3/4" to 12". From 13.6 to 56775 litres/minute Icon
rule
HO Liquid - Sanitary Turbine Flowmeters Turbine flowmeter is accepted as meeting 3-A Sanitary Standard No. 28-03 for measurement of process liquids where high sanitary standards are required. In 11 sizes, ¼? to 3? with standard Tri-Clamp? fittings, covering flow rates for 0.35 to 650 USGPM Icon
rule
HO Series Autoclave® Liquid - Turbine Flowmeters Maximum working pressure of 10,000,15,000 and 20,000 psi dependent upon line size. Outstanding accuracy. Provides wide flow ranges (10:1 to 100:1 turndown ranges available). Autoclave® end connections. Icon
rule
CAT 1 Conditioner- Amplifier- Transmitter The CAT1 is a microprocessor controlled 2-wire 4-20mA transmitter. The CAT1 converts a low level, frequency signal from a flowmeter sensor into an analogue 4-20mA output. The output is proportional to the flow rate. Icon
rule
CAT 2 Conditioner- Amplifier- Transmitter The CAT2 is a versatile DC or AC powered transmitter that can be interfaced with any Hoffer flow sensor. It provides a pulse output and an analogue signal proportional to the flow rate. The CAT2 can be configured with High and Low alarms. Icon
rule
CAT 3 Conditioner- Amplifier- Transmitter The CAT3 is a DC or AC powered, microprocessor controlled transmitter. It outputs a pulse scaled per unit of flow, and analogue signal proportional to flow rate. The CAT3 can be configured with High and Low alarms. Icon
rule