Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, Titanium, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 45 l/hr. Minimum subject to fluid viscosity e.g. 0.1 l/hr on 50cSt and 0.018 l/hr with special calibration. 90 l/hr with AGPVD or TiPVD option.

Any non abrasive, chemically compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 414 bar and above (max 4000bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 90 l/hr. Minimum subject to fluid viscosity e.g. 0.7 l/hr on 3cSt. 180 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 414 bar and above (max 4000bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range.

0 to 250 l/hr. Minimum subject to fluid viscosity e.g. 1.6 l/hr on 50cSt and 0.8 l/hr with special calibration. 500 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 414 bar and above (max 2500bar), temperature from -40 to +150°C.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit available. Hazardous area approved as standard. IP68.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 500 l/hr. Minimum subject to fluid viscosity e.g. 3.2 l/hr on 50cSt and 1.6 l/hr with special calibration. 1000 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 414 bar and above (max 2500bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 1200 l/hr. Minimum subject to fluid viscosity e.g. 6 l/hr on 11cSt. 2400 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 207 bar and above (max 1380bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 2400 l/hr. Minimum subject to fluid viscosity e.g. 12 l/hr on 11cSt. 4800 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 207 bar and above (max 1380bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit and hub available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 3600 l/hr. Minimum subject to fluid viscosity e.g. 18 l/hr on 11cSt. 7200 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 207 bar and above (max 1380bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit and hub available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 4000 l/hr. Minimum subject to fluid viscosity e.g. 270 l/hr on 11cSt. 12 to 8000 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 207 bar and above (max 1380bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 6,000 l/hr. Minimum subject to fluid viscosity e.g. 500 l/hr on 11cSt. 12,000 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 40 bar and above (max 1035bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit available.

Positive displacement flowmeter with 316 stainless steel body, providing a pulse output. Nitronic SS, brass or carbon graphite rotor dependent on pressure and flow rate range. Hazardous area approved as standard.

0 to 16,500 l/hr. Minimum subject to fluid viscosity e.g. 1500 l/hr on 11cSt. 33,000 l/hr with AGPVD option.

Any non abrasive, chemical compatible clean liquid. 0.8 to 1,000,000 cSt. For higher viscosities up to 2000 cSt a reduced maximum flow rate may apply.

• ±1% reading - linearity.
• ±0.5% reading - with linearisation
• ±0.25% repeatability.

Pressures up to 40 bar and above (max 690bar), temperature from -40 to +150°C. IP68.

Simple construction with only one moving part and reed switch pulse output. Available with any end connections to suit your application. Female NPT threaded connections standard, wafer fit, hubs available.