Litre Meter Downloads
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Please click on the pdf icon to open the Datasheet
| LMX range - in-line 100 bar 100°C SS 1/2"BSP or NPT | ||
| LMX003 to LMX12.5 | LMX range, easy to install, very high specification as standard. All flows up to 65 l/min; from 003 up to 12.5 and higher. |  |
| SPFA - SS body PFA rotor, 40 or 120 bar, all flows | ||
| LM series to 28 l/min, 40 bar | SPFA - SS body PFA rotor, 40bar, all flows up to 28 l/min; from 003 up to 220 | |
| MM series 1/2" and above, 40 bar | SPFA - SS body PFA rotor, 40bar, all flows from 1-65 l/min upwards; MM12.5 up to MM300 | |
| LM series to 28 l/min, 120bar | SPFA - SS body PFA rotor, 120bar, all flows up to 28 l/min; from 003 up to 220 | |
| MM series 1/2" and above, 120 bar | SPFA - SS body PFA rotor, 120bar, all flows from 1-65 l/min upwards; MM12.5 up to MM300 | |
| SS meters, 30bar, 100bar, 200bar, 345bar, 690bar and higher | ||
| LM series to 28 l/min and 33 l/min | Teflon PFA rotor, one elastomer and 316SS body; from 003 up to 220 and 330 | |
| MM series, 1/2" and above | Teflon PFA rotor, one elastomer and 316SS body; MM12.5 up to MM300 | |
| PVC - low pressure - solvent weld | ||
| LM series low flow to 28 l/min | LMPVC - PVC body PFA rotor, 5bar, all flows up to 28 l/min; from 01 up to 220 | |
| MM series, 1/2" and above | MMPVC - PVC body PFA rotor, 5bar, all flows from 1-65 l/min upwards; MM12.5 up to MM300 | |
| PVC3 - low pressure - all plastic wetted parts | ||
| LM series low flow to 28 l/min | LMPVC3 - PVC body, PFA rotor, 5bar, all flows up to 28 l/min; from 01 up to 220, 3/4" connections | |
| LMX series to 28 l/min | LMPVC3 - PVC body, PFA rotor, 5bar, all flows up to 28 l/min; from 01 up to 220, 1/2" connections | |
| MM series 1/2" and higher | MMPVC3 - PVC body, PFA rotor, 5bar, all flows from 1-65 l/min upwards; MM12.5 up to MM300 | |
| GN - low pressure, moulded body, push-on hose connection | ||
| LM GN Series - low flow to 28 l/min | GN - low pressure, moulded body, push-on hose connection; from 005 up to 220 | |
| Titanium | ||
| LM series - low flow to 28 l/min | For low viscosities and pressures when stainless steel won't cut it. All flows up to 28 l/min; from 003 up to 220. | |
| MM Series in Titanium; 1/2" and higher | For low viscosities and pressures when stainless steel won't cut it. 1/2" and above. All flows from 1-65 l/min upwards; MM12.5 up to MM300. | |
| Hastelloy | ||
| LM series - low flow to 28 l/min | For low viscosities and pressures when stainless steel or titanium won't cut it. All flows up to 28 l/min; from 003 up to 220. | |
| Duplex | ||
| LM series - low flow to 33 l/min | For low viscosities and pressures when Duplex is specified. All flows up to 33 l/min; from 003 up to 220 and 330. | |