Euromag

This page has been updated & will redirect in a few seconds

Euromag provides a full lineup of electromagnetic flow meters for the industrial and sanitary markets from 3mm to 2000mm, with various liner materials and a wide range of flows. These meters are suitable for industries from water, wastewater, foods, beverage, chemical, liquids containing solid matter steel, nonferrous metals, fertilizers, inorganic chemicals, pulp and paper, and polymer chemicals.

Electromagnetic Flowmeter
Electromagnetic Converter

Electromagnetic Flowmeters
Click Photo for Spec Sheet	Description	Accuracy	Flow range	Liquid	Max. Pressures/Temperature	Features
500 series	Low flow electromagnetic flowmeter with PTFE liner. BSP connections. 3, 6, 10, 15 & 20mm diameter. 15mm & 20mm are standard sizes.	±0.2% over flow range 0.5 to 5 m/s; maximum velocity 10 m/s	At 2 m/s 0.85 to 30.5 litres/minute	Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.	16 bar -20°C to +160°C (Compact version 80°C)	PTFE Lining with three 316L stainless steel electrodes as standard; IP68 to 1.5m metres 501 series has PP liner, 10 bar & IP67
501 series	Low flow electromagnetic flowmeter with PP liner. BSP connections. 3, 6, 10, 15 & 20mm diameter. 15mm & 20mm are standard sizes.	±0.2% over flow range 0.5 to 5 m/s; maximum velocity 10 m/s. Converter normally separate.	At 2 m/s 0.85 to 30.5 litres/minute	Any conductive liquid, must be greater than 10 microSiemens/centimetre. Accuracy not dependent on solids content.	10 bar -20°C to +60°C	PTFE Lining with three 316L stainless steel electrodes as standard; IP67 500 series has PTFE liner, 16 bar & IP68
4000 series	Low flow electromagnetic flowmeter - the right choice for the automotive market. DN15 to DN50, hose connections, PN10, PBT & fibreglass lining	±0.5% over flow range 0.5 to 5 m/s; maximum velocity 10 m/s. Converter normally separate.	At 2 m/s 21.2 to 236 litres/minute depending on connection size.	Any conductive liquid, must be greater than 10 microSiemens/centimetre. Accuracy not dependent on solids content.	10 bar -25°C to +80°C -25°C to +120°C with separate converter (6.1m cable standard)	PBT & Fibreglass lining with three 316L stainless steel electrodes as standard; IP67 NEMA 6 Also available: 500 series has PTFE liner, 16 bar & IP68
1000 EL series	Extended linearity electromagnetic flowmeter with PTFE liner designed for wafer fitting between flanges. 25mm to 300mm	±0.2% over flow range 0.5 to 5 m/s; turndown 1000:1; maximum velocity 10 m/s	At 2 m/s between 59 and 8480 l/min depending on meter size	Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.	40 bar (16bar over 200mm) -40°C to +180°C (for separate version); 80°C for the compact version	PTFE Lining with three Hastelloy electrodes as standard; IP68 to 1.5 metres 1100J series has PBT liner, IP67, low cost
1100J Series	Lightweight, compact electromagnetic flowmeter with PBT liner designed for wafer fitting between flanges. 25mm - 150mm	±0.2% over 0.5 to 5 m/s; maximum velocity 10 m/s	At 2 m/s between 59 and 2121 l/min depending on meter size	Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.	20 bar 0°C to +110°C (for separate version); 80°C for the compact version	PBT Lining with three 316L stainless steel electrodes as standard; IP67 1000 series has PTFE liner and larger sizes
2200 EL series	Extended linearity electromagnetic flowmeter with PTFE liner designed for flange fitting	±0.2% over 0.5 to 5 m/s; Turndown 1000:1; maximum velocity 10 m/s	At 2 m/s between 59 and 15080 l/min depending on meter size	Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.	6 to 64bar -20°C to +180°C (for separate version); 80°C for the compact version	PTFE Lining with three Hastelloy electrodes as standard; Hard rubber Lining above 150mm IP68 to 1.5 meters
2500 El Series	Extended linearity electromagnetic flowmeter with PTFE or Ebonite liner designed for flange fitting. 450 to 2000mm	±0.2% over 0.5 to 5 m/s; Turndown 1000:1; maximum velocity 10 m/s	At 2 m/s between 1145 and 22619 m3/hr depending on meter size	Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.	10 bar (mostly) -20°C to +80°C (for ebonite version); 180°C for the PTFE version	Ebonite lining with three SS electrodes as standard; PTFE version IP68 to 1.5 meters
2400 Series	Hygienic electromagnetic flowmeter with PTFE liner	±0.2% over flow range 0.5 to 5 m/s; maximum velocity 10 m/s	At 2 m/s between 59 and 942 l/min depending on meter size	Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.	16 bar -40°C to +140°C (for separate version); 60°C for the compact version	PTFE Lining with two 316L electrodes as standard; IP68 to 1.5 meters 304SS externals
2700 Series	Insertion electromagnetic flowmeters with PTFE. Pipe size 80 to 3000mm	3% of measured value with a flow velocity higher than 0.3m/s; maximum velocity 10 m/s	Velocity range: 0 to 10m/s	Any conductive liquid, must be greater than 5 microSiemens/centimetre. Accuracy not dependent on solids content.	10/16 bar -40°C to +180°C (for separate version); 60°C for the compact version	PTFE with 316L SS electrode as standard; pipe end 304SS IP68 to 1.5 meters 2660, low cost 2770, 16bar 2700, hot tap