Hoffer

Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 12". Ceramic bearings.

0.24-17 up to 3028-56775 litres/min. Overrange 150% intermittent.

Any non abrasive, chemical compatible clean liquid.

±0.5% reading - linearity. ±0.25% reading - typical. ±0.1% repeatability (±0.05% typical).

Pressures up to 500 bar for higher see HO Autoclave and WingNut, temperature from -270 to +230°C +450°C optional.

Simple construction with only one moving part and pulse output. MS, male NPT threaded, ANSI flange connections standard, wafer fit available.

Turbine flowmeter with 316 stainless steel body, providing a pulse output, for gas service, 1/4" to 12". Ceramic bearings.

0.15-3.5 up to 200-12000 ACF/min. Overrange 150% intermittent. 4 different blade angles.

Any non abrasive, chemical compatible clean gas.

±1% reading - linearity density dependent. ±0.25% repeatability (over specific range).

Pressures up to 500 bar, temperature from -270 to +177°C +204°C optional.

Simple construction with only one moving part and pulse output. MS, male NPT threaded, ANSI flange connections standard, wafer fit available.

Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 3/4" to 12". Ceramic bearings.

13.6 to 56775 litres/min. Overrange 150% intermittent.

Any non abrasive, chemical compatible clean liquid. Accuracy quoted for sg 1 and 1cSt.

±0.25% reading - linearity. ±0.5% reading - extended max flow range. ±0.15% reading - premium linearity over reduced range. ±0.02% repeatability

Pressures up to 500 bar, temperature from -270 to +230°C +450°C optional.

Simple construction with only one moving part and pulse output. MS, male NPT threaded, ANSI flange connections standard, wafer fit available.

Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 3". Ceramic bearings. 3-A Sanitary standard 28-03.

1.3 to 2460 litres/min. Overrange 150% intermittent.

Any non abrasive, chemical compatible clean liquid.

±0.5% or better reading - linearity. ±0.1% or better repeatability

Pressures up to 300psig up to 37°C, sensors available for temperature from -270 to +230°C +450°C optional.

Simple construction with only one moving part and pulse output. Ladish Tr-Clover Tri-Clamp standard.

Turbine flowmeter with 316 stainless steel body, providing a pulse output, for liquid service, 1/4" to 3/4". Ceramic bearings. Autoclave male thread.

0.24 to 132 litres/min. Overrange 150% intermittent.

Any non abrasive, chemical compatible clean liquid.

±0.5% reading - linearity. ±0.25% reading - typical. ±0.1% repeatability (±0.05% typical).

Pressures 10,000, 15,000 & 20,000 psi, temperature from -270 to +230°C +450°C optional.

Simple construction with only one moving part and pulse output. 3/4" & 1" Autoclave male thread standard.

Wing Nut High Pressure flowmeter with 4130 stainless steel body, providing a pulse output, for liquid service. Ceramic bearings. Savage or FMC Wing Nut fitting

15 to 4000 litres/min. Overrange 150% intermittent. Other ranges available

Any non abrasive, chemical compatible clean liquid.

±0.5% reading - linearity. ±0.25% reading - typical. ±0.1% repeatability.

Pressures 15,000 psi, temperature from -270 to +230°C.

Simple construction with only one moving part and pulse output. 1 to 3" size, for Water, Liquid Carbon Dioxide and Cement/Sand Slurry.

Wing Nut High Pressure flowmeter with 4130 stainless steel body, providing a pulse output, for gas service. Ceramic bearings. Savage or FMC Wing Nut fitting.

Consult factory

Any non abrasive, chemical compatible clean gas.

±1% reading - linearity. ±0.25% repeatability.

Pressures 15,000 psi, temperature from -270 to +177°C.

Simple construction with only one moving part and pulse output. 1 to 3" size, typically for oil well fracturing with Nitrogen gas.

Microprocessor controlled 2-wire 4-20mA transmitter.

The CAT1 converts a low level, frequency signal from a flowmeter sensor into an analogue 4-20mA output. The output is proportional to the flow rate.

Loop power 10-30Vdc

4-20mA

Choice of 5 enclosures. Up to 20 point linearization.

Versatile DC or AC powered transmitter that can be interfaced with any Hoffer flow sensor. The CAT2 can be configured with High and Low alarms.

It provides a pulse output and an analogue signal proportional to the flow rate.

8-30Vdc; 100-240Vac

4-20mA, 1-5V, 0-5V, 0-10V(requires 12-30Vdc supply). Pulse outputs, pulse scaling

Choice of 5 enclosures.

Microprocessor controlled 4-20mA & pulse transmitter. DC or AC powered. The CAT3 can be configured with High and Low alarms.

It provides a pulse output and an analogue signal proportional to the flow rate.

8-30Vdc; 100-240Vac

4-20mA, 1-5V. Pulse outputs, pulse scaling, High/low alarm relay or open collector

Choice of 5 enclosures. Up to 20 point linearization.