Litre Meter specialise in the design, manufacture and supply of flowmeters. The unique Pelton wheel based meter design ensures an inherent reliability which has been proven in more than four decades of operation. Turbine meters provide full flow measurement, quick response and excellent repeatability. Helical screw positive displacement meters are larger than gear meters and are suitable for higher flow rates. Listed below are all the flow meters within our range that are suitable for batch control:
Make a quick enquiry now..
Pelton Wheel Meter
Also known as a radial turbine the highly efficient Pelton Wheel meter has some major advantages. The very large blade area compared with the flow inlet port size produces an exceptionally wide range flowmeter which can measure very low flows. The flow through the inlet of the meter is accurately directed onto the rotor which rotates at a speed in linear proportion to the flow rate. A small sensing coil detects the ferrites mounted in the flow meter rotor blade tips as they pass. No drag is imposed on the rotor which assists in the measurement of extremely low flows. Sapphire bearings provide a very low friction mechanically-robust bearing with long life characteristics. Turndown can be as high as 280:1. Ideally suited for low viscosity constituents measurement up to 2″ pipe sizes and larger and up to 10cSt. 0.003 to 500 l/min; ±2.0% of reading (also 1.0%); some models suitable for flow measurement at higher pressure.
Inline ‘axial’ turbine flowmeters are velocity measuring devices – they measure the average velocity of a fluid flowing through the body of the meter. Mounted within the body of a liquid turbine flowmeter is a vaned rotor. The rotor is centred on a shaft and allowed to rotate on bearings. The shaft is supported in the housing by tube bundles that also provide a measure of flow conditioning for the fluid stream. Good for low viscosity epoxy and catalyst flow metering. Wide size range and excellent accuracy. 0.24-17 up to 3028-56775 litres/min. Overrange 150% intermittent. ±0.25% reading – typical. ±0.1% repeatability.
Helical Screw Meter
Positive displacement flowmeters, also known as PD meters, measure volumes of fluid flowing through by counting repeatedly the filling and discharging of known fixed volumes. A typical positive displacement flowmeter comprises a chamber that obstructs the flow. Inside the chamber, a rotating/reciprocating mechanical unit is placed to create fixed-volume discrete parcels from the passing fluid.
The helical screw principle uses 2 counter rotating gears to form a continuous constant volume cavity. The SRZ is a stainless steel version suitable for high viscosity and abrasive media flow metering. 0.04 to 400 litres per minute, +/-0.1% accuracy, +/-0.05% repeatability. Housing in 316L and 303 with screws in 1.4122 (430), tungsten carbide bearings and FKM or PTFE seals. Pressures to 400 bar, -40°C to 150°C.